Adapter sleeves

Adapter sleeves

Information

Adapter sleeves are always supplied with a locknut and locking device. They can be ordered in metric or imperial dimensions, or to a customised design. A hydraulic process also enables easy installation and removal. With this design, the adapter sleeves and withdrawal sleeves have oil grooves and oil ducts. As adapter sleeves are used as bearing accessories, their product codes are based on the system for coding bearings. The product codes for adapter sleeves with metric dimensions start with H, even if the bore is given in imperial dimensions. Adapter sleeves starting with SNW and SNP are only ever produced in imperial dimensions.

3
Bezeichnung d1 (mm) d2 (mm) l (mm)
H 2306 25 30 38
H 2307 30 35 43
H 2308 35 40 46
H 2309 40 45 50
H 2310 45 50 55
H 2311 50 55 59
H 2312 55 60 62
H 2313 60 65 65
H 2314 60 70 68
H 2315 65 75 73
3
Bezeichnung d1 (Inch) d2 (mm) l (mm)
H 218-3 1/4 3 1/4 90 52
H 218-3 3/16 3 3/16 90 52
H 219-3 1/4 3 1/4 95 55
H 220-3 1/2 3 1/2 100 58
H 220-3 7/16 3 7/16 100 58
H 222-4 4 110 63
H 2305-3/4 3/4 25 35
H 2306-1 1 30 38
H 2306-15/16 15/18 30 38
H 2307-1 1/8 1 1/8 35 43
3
Bezeichnung d1 (Inch) d2 (mm) l (Inch)
SNP 3156-10 10 280 7.766
SNP 3160-10 15/16 10 15/16 300 8.380
SNP 3164-12 12 320 9.111
SNP 3168-12 7/16 12 7/16 340 9.787
SNP 3172-13 7/16 13 7/16 360 9.862
SNP 3176-13 15/16 13 15/16 380 10.066
SNP 3180-14 15/16 14 15/16 400 10.459
SNP 3256-10 7/16 10 7/16 280 8.947
SNP 3260-10 15/16 10 15/16 300 9.640
SNP 3260-11 11 300 9.640