Adapter sleeves
Information
Adapter sleeves are always supplied with a locknut and locking device. They can be ordered in metric or imperial dimensions, or to a customised design. A hydraulic process also enables easy installation and removal. With this design, the adapter sleeves and withdrawal sleeves have oil grooves and oil ducts. As adapter sleeves are used as bearing accessories, their product codes are based on the system for coding bearings. The product codes for adapter sleeves with metric dimensions start with H, even if the bore is given in imperial dimensions. Adapter sleeves starting with SNW and SNP are only ever produced in imperial dimensions.
14
| Bezeichnung | d1 (mm) | d2 (mm) | l (mm) |
|---|---|---|---|
| H 240/530 H | 500 | 530 | 343 |
| H 240/560 H | 530 | 560 | 358 |
| H 240/600 H | 560 | 600 | 377 |
| H 240/630 H | 600 | 630 | 395 |
| H 240/670 H | 630 | 670 | 418 |
| H 240/710 H | 670 | 710 | 438 |
| H 240/750 H | 710 | 750 | 460 |
| H 240/800 H | 750 | 800 | 475 |
| H 240/850 H | 800 | 850 | 495 |
| H 240/900 H | 850 | 900 | 520 |
14
| Bezeichnung | d1 (Inch) | d2 (mm) | l (mm) |
|---|---|---|---|
| H 319-3 1/4 | 3 1/4 | 95 | 68 |
| H 320-3 1/2 | 3 1/2 | 100 | 71 |
| H 320-3 7/16 | 3 7/16 | 100 | 71 |
| H 322-4 | 4 | 110 | 77 |
14
| Bezeichnung | d1 (Inch) | d2 (mm) | l (Inch) |
|---|---|---|---|
| SNW 3144-8 | 8 | 220 | 5.901 |
| SNW 32-5 3/4 | 5 3/4 | 160 | 4.578 |
| SNW 32-5 7/16 | 5 7/16 | 160 | 4.578 |
| SNW 34-5 15/16 | 5 15/16 | 170 | 4.847 |
| SNW 34-6 | 6 | 170 | 4.847 |
| SNW 36-6 1/2 | 6 1/2 | 180 | 5.038 |
| SNW 36-6 7/16 | 6 7/16 | 180 | 5.038 |
| SNW 38-6 15/16 | 6 15/16 | 190 | 5.261 |
| SNW 38-7 | 7 | 190 | 5.261 |
| SNW 40-7 3/16 | 7 3/16 | 200 | 5.484 |