Adapter sleeves

Information

Adapter sleeves are always supplied with a locknut and locking device. They can be ordered in metric or imperial dimensions, or to a customised design. A hydraulic process also enables easy installation and removal. With this design, the adapter sleeves and withdrawal sleeves have oil grooves and oil ducts. As adapter sleeves are used as bearing accessories, their product codes are based on the system for coding bearings. The product codes for adapter sleeves with metric dimensions start with H, even if the bore is given in imperial dimensions. Adapter sleeves starting with SNW and SNP are only ever produced in imperial dimensions.

i Please take note of our assembly instructions

Adapter sleeves with metric dimensions Adapter sleeves for inch shafts Adapter sleeves with inch dimensions

Bezeichnung	d1 (mm)	d2 (mm)	l (mm)
H 215	65	75	43
H 216	70	80	46
H 217	75	85	50
H 218	80	90	52
H 219	85	95	55
H 220	90	100	58
H 221	95	105	60
H 222	100	110	63
H 2304	17	20	31
H 2305	20	25	35

Bezeichnung	d1 (Inch)	d2 (mm)	l (mm)
H 211-1 15/16	1 15/16	55	37
H 211-2	2	55	37
H 212-2 1/8	2 1/8	60	38
H 213-2 1/4	2 1/4	65	40
H 213-2 3/16	2 3/16	65	40
H 215-2 7/16	2 7/16	75	43
H 216-2 11/16	2 11/16	80	46
H 216-2 3/4	2 3/4	80	46
H 217-2 15/16	2 15/16	85	50
H 217-3	3	85	50

Bezeichnung	d1 (Inch)	d2 (mm)	l (Inch)
SNP 3060-11	11	300	6.727
SNP 3064-11 1/2	11 1/2	320	6.946
SNP 3064-11 15/16	11 15/16	320	6.946
SNP 3068-12 7/16	12 7/16	340	7.543
SNP 3072-13 7/16	13 7/16	360	7.579
SNP 3076-13 15/16	13 15/16	380	7.743
SNP 3080-14 15/16	14 15/16	400	8.411
SNP 3148-8 15/16	8 15/16	240	6.638
SNP 3152-9 1/2	9 1/2	260	7.593
SNP 3152-9 7/16	9 7/16	260	7.593