Adapter sleeves

Information

Adapter sleeves are always supplied with a locknut and locking device. They can be ordered in metric or imperial dimensions, or to a customised design. A hydraulic process also enables easy installation and removal. With this design, the adapter sleeves and withdrawal sleeves have oil grooves and oil ducts. As adapter sleeves are used as bearing accessories, their product codes are based on the system for coding bearings. The product codes for adapter sleeves with metric dimensions start with H, even if the bore is given in imperial dimensions. Adapter sleeves starting with SNW and SNP are only ever produced in imperial dimensions.

i Please take note of our assembly instructions

Adapter sleeves with metric dimensions Adapter sleeves for inch shafts Adapter sleeves with inch dimensions

Bezeichnung	d1 (mm)	d2 (mm)	l (mm)
H 205	20	25	26
H 206	25	30	27
H 207	30	35	29
H 208	35	40	31
H 209	40	45	33
H 210	45	50	35
H 211	50	55	37
H 212	55	60	38
H 213	60	65	40
H 214	60	70	41

Bezeichnung	d1 (Inch)	d2 (mm)	l (mm)
H 205-3/4	3/4	25	26
H 206-1	1	30	27
H 206-15/16	15/16	30	27
H 207-1 1/8	1 1/8	35	29
H 207-1 3/16	1 3/16	35	29
H 208-1 1/4	1 1/4	40	31
H 209-1 1/2	1 1/2	45	33
H 209-1 7/16	1 7/16	45	33
H 210-1 11/16	1 11/16	50	35
H 210-1 3/4	1 3/4	50	35

Bezeichnung	d1 (Inch)	d2 (mm)	l (Inch)
SNP 148-8 15/16	8 15/16	240	8.109
SNP 152-9 7/16	9 7/16	260	8.744
SNP 3048-8 15/16	8 15/16	240	5.432
SNP 3052-9 1/2	9 1/2	260	6.019
SNP 3052-9 7/16	9 7/16	260	6.019
SNP 3056-10	10	280	6.191
SNP 3056-10 1/2	10 1/2	280	6.191
SNP 3056-10 7/16	10 7/16	280	6.191
SNP 3056-9 15/16	9 15/16	280	6.191
SNP 3060-10 15/16	10 15/16	300	6.727